Gas to Liquids - GTL

Researchers have strived to find a way to efficiently convert natural gas directly to usable liquid fuel via gas-to-liquids (GTL) processes since German scientists Fischer and Tropsch successfully converted coal to liquid fuel in the 1920s. Though large sums of money and effort have been invested in improving GTL technology, converting methane to longer chained hydrocarbon compounds remains an energy-intensive process. As a result, the number of commercial-sized GTL plants remains limited. The prospect of producing tailor-made liquid fuel without any of the impurities associated with crude oil-derived fuels continues to be a competitive pursuit for most of the major international energy players.

Though SASOL has been operating large coal-to-liquids plants in South Africa since the 1950s, the next commercial plant was ExxonMobil’s gas to methanol to gasoline plant in New Zealand in 1985. This was followed by Shell’s first large-scale (greater than 10,000 bpd) GTL plant in Malaysia in 1993. From 1994 to 2005, no new full-scale GTL plant was commissioned, though a number of pilot projects and units were constructed within existing oil refineries. During that time period, however, saw a number of major announcements regarding projects in Qatar and a number of other gas-rich countries. Sustained high crude prices, controllable capital expenses, and the motivations of resource-rich governments such as Qatar and Nigeria are key factors that will encourage the further development of GTL projects.The recently completed Shell Pearl GTL plant, and to a lessor extent, the smaller SASOL Oryx plant, both in Qatar, are major engineering and financial achievements. It remains to be seen if the plants can run economically and produce the promised volumes of GTL products.  The resurgence of GTL in the US is also an exciting development.

To see the recently completed Shell GTL plant in Qatar, please watch the video below


The most commonly cited end products for recently announced GTL projects have been diesel, lubricant base stocks, and petrochemicals.

Diesel accounts for nearly one-half of all vehicle fuels, transporting 70% of the goods of the world. It is particularly important in developing countries where trucks and buses - instead of private gasoline vehicles - dominate the transportation systems.

In an oil refinery, the process of temperature distillation separates long chains of liquid hydrocarbons (C15 and higher crude oils) into smaller chains, separating diesel, gasoline, naphtha, kerosene, and lighter gases from crude oil. Unfortunately, this relatively simple process retains most of the impurities from the original crude oil in the resulting products. Removing these impurities is expensive and requires sophisticated process units. If the impurities, especially sulfur, are not removed, they are eventually released into the atmosphere (as SOx and NOx) from diesel engines of buses, trucks, and power generators.

GTL aims to produce clean diesel and other transport fuels by “going the other way,” or by joining methane-rich hydrocarbons into the required length of diesel and other fuel compounds by using catalyst reactions. GTL processes can also be modified to produce other liquids, such as naphtha (feedstock for petrochemicals), lube oils, and LPGs. As indicated in table below, liquid GTL fuels produced from natural gas contain no impurities, thus are much cleaner burning than conventional fuels. 

They may either be sold at a premium price directly to the market or blended to upgrade lower quality product into higher grades. Keeping GTL fuels separatedfrom conventional (and thus, dirtier) fuels would require separate storage, transportation, and retailing infrastructure, potentially reducing the price advantage.

 Many in the industry consider GTL as the “holy grail” of gas technology. The main reasons for this pursuit are the desires to:

  • Exploit the estimated 3,000 tcf of the world’s gas reserves of 6,100 tcf considered remote or stranded—not easily or economically accessible to markets by either pipelines or LNG.
  • Monetize the vast amounts of gas produced in association with liquid hydrocarbons— either crude oil or NGLs—that are wastefully flared into the atmosphere due to lack of viable gas transportation options. One study estimates that operators release 3.5 tcf of natural gas into the atmosphere per year, most of it from African (mainly Nigerian and Angolan) and Russian oil fields. These flared gases alone could potentially produce 1 MMb/d of GTL fuels. In addition, many oil fields are not produced at full capacity due to lack of viable outlets for the associated gas that is produced with the oil.
  • Produce clean burning fuels to minimize environmental impacts that also can be blended to improve the quality of conventional fuels without any loss in fuel economy or engine performance.
  • Produce high-quality lubricant base stocks demanded by modern engines.
  • Economically produce safe food-grade waxes.
  • Diversify sources of energy, producing transportation fuels from gas, and to a limited extent, coal.

The promise of converting otherwise wasted or underutilized resources into valuable commodities that can command a premium price due to their purity is tantalizing. Any excitement must be tempered with the reality that processes promoted today require extremely cheap input gas, consume 40% or more of the original energy content of gas in the process, and, in many cases, are unproven on a large commercial scale.

All of the GTL technologies are based on the original Fischer-Tropsch chemical process. This process converts a synthesis gas mixture of hydrogen and CO called syngas into longer chained intermediate products such as liquid fuel and various petrochemicals. This is accomplished using iron-, nickel-, or cobalt-based catalysts. The table below details the steps for producing liquid fuels from natural gas

.

Economic comparisons of the GTL process are hard to prove and are subject to market hype. Table below summarizes approximate gas requirements for a sampling of proposed GTL plants.

Assuming that a plant of 2,000 b/d can be constructed and operated economically, it would require a gas field with reserves less than 200 bcf over 25 years. Using an average of 101 MMcfd per 10,000 bbl, and assuming that most of the output is diesel-equivalent, the GTL conversion process requires 101,000 MMBtu to produce 58,250 MMBtu of product. (One barrel of diesel contains 5,825 MMBtu.) Stated differently, 42% of the input energy gas source is consumed in the process to produce the output energy liquid product, resulting in overall efficiency of around 58%.

Until the process efficiency and reliability significantly improve, the author is a GTL sceptic. There are a number of the factors that will make it difficult for GTL to gain traction in the near future; the value of feed gas continues to rise in tandem with rises in the price of engineering and steel; the process is proving difficult to scale up from the laboratory, and governments are finding LNG and petrochemicals more financeable commercialization options.